The boilers of CARBOROBOT Classic 180 type can be perfectly employed for the heating of blocks of freehold flats, workshops, garden greenhouses, plant-houses, in every place, where a continuous, regulated, automatic heating without control is necessary. CARBOROBOT totally replaces oil and gas boilers with similar capacity. CARBOROBOT can be operated with a similar capacity as gas and oil heating, far cheaper than those because of the lower price of fuel.

They are produced in two version:
Classic 180 (C180) operate with coal default.
Classic 180 Bio(C180 Bio) can operate with biomass and fuel mixes too over the coal.

The nominal power is 180kW(155.000kcal/h) what measured with average fuel with 15BTU(17MJ/kg,4000kcal/kg). The ideal fuel piece size is 5-25mm. The dust content up to 20% possible. The ash content of different fuels can be up to 20%!!
The boiler mounted with multicyclone filter. For the installation need standard chimney.

To see the boiler from the front side of Fuel container the handle is right or left. On handle side leave place to Ash door opening and for the shovelling(not less 1m).
In front of the Fuel container(d) leave free distance min. 1,5m
Behind the boiler leave distance min. 50 cm for the tubes.
The Fuel door in opened position 30 cm higher than the Fuel container.
The left side of the boiler(the container wall) not to be nearer 80 cm to the wall..
At the 120-140-180-300 types the fuel container can be top feeding or front feeding. Top feeding good for feeder system placed over the boiler or when using pathway over the fuel container. Front feeding need for the manual feed or for the screw feeder.
More information Screw feeders